BlueCube Cold Plunge FAQs
Product Features, Operation & Maintenance
BlueCube’s temperature setting can be adjusted between 37-70 degrees Fahrenheit, giving you complete control over your cold plunge experience.
Yes, with the 3-Speed Variable Rate Flow System, you can adjust the flow rate during use to self-titrate not only around temperature but thermal layer disruption as well.
Otherwise, without the 3 speed, your BlueCube comes standard with high flow rate for maximum adaption and benefits.
Otherwise, without the 3 speed, your BlueCube comes standard with high flow rate for maximum adaption and benefits.
Yes, the temperature of a BlueCube can be adjusted between 37-70 degrees Fahrenheit (2.77-21 degrees C) while in use, allowing for a fully customizable cold plunge experience.
All BlueCube Cold Plunges require a 120V 20 Amp Dedicated GFCI outlet.
BlueCube Cold Plunges can be placed inside or outside, and come equipped with an insulative spa cover.
If outside, we highly recommend placing your BlueCube in the shade. Direct sunlight damages all products, all surfaces and materials.
If outside, we highly recommend placing your BlueCube in the shade. Direct sunlight damages all products, all surfaces and materials.
BlueCube Cold Plunges are raised with a bottom drain. The entire ice bath can be drained in 15 minutes. The bottom drain attaches to a garden hose for easy of use.
Refilling takes approximately 15 minutes (depending on water pressure).
Refilling takes approximately 15 minutes (depending on water pressure).
The BlueCube plugs into a standard 120 V outlet and requires ~13 amps regular power use. It works hard bringing down the water temperature, but is extremely efficient at maintaining the optimum temperature once it has been achieved.
The 20 amp dedicated line is to ensure your breaker doesn’t trip from the initial amp draw.
The 20 amp dedicated line is to ensure your breaker doesn’t trip from the initial amp draw.
The water cools at 11°- 13°F per hour. It can then run steady at that temperature 24/7, making it convenient to ice bath at any time.
We recommend changing the water every 3-4 weeks minimum if you are plunging every day for residential use.
If you are a commercial center, you may need to change water daily/weekly based on your use.
To extend the time between water changes, ensure that you are rinsing off prior to entering your BlueCube. This is especially important if you are using a sauna or exercising. Going directly from sauna into the BlueCube will require more water changes.
If you are a commercial center, demand that every one of your patron rinses after sauna or exercise prior to entering your BlueCube.
If you are a commercial center, you may need to change water daily/weekly based on your use.
To extend the time between water changes, ensure that you are rinsing off prior to entering your BlueCube. This is especially important if you are using a sauna or exercising. Going directly from sauna into the BlueCube will require more water changes.
If you are a commercial center, demand that every one of your patron rinses after sauna or exercise prior to entering your BlueCube.
No, everything you need to use your BlueCube is included.
We recommend setting up your electrical to 120 v 20 amp dedicated GFCI outlet prior to your BlueCube arriving.
We recommend setting up your electrical to 120 v 20 amp dedicated GFCI outlet prior to your BlueCube arriving.
